XCB系列塑料管材管件熱穩定性試驗專用試驗箱

一、 產品描述

XCB-300Ⅱ型塑料管材管件熱穩定性試驗專用試驗箱主要用于管材在110℃下，管內介質為空氣條件下進行的靜液壓試驗，測定試樣在規定的應力條件下，通過8760小時試驗后,是否發生破壞。與靜液壓試驗機配套使用可完成靜液壓狀態下的熱穩定性試驗。

二、 產品特點

1、雙層隔熱玻璃門、內置觀察燈，即方便用戶觀察試驗情況，又避免了意外燙傷。

2、合理的排水裝置可及時排除試驗失敗工位產生的積水，減少對其它工位的影響。

3、厚達90mm的保溫層，降低了試驗成本，提高了儀器的可靠性。

4、加熱器具有自保護功能，避免了加熱器的意外損壞。

5、完善的漏電保護，過熱保護裝置提供了對儀器及使用人員的防護。

6、全不銹鋼框架和內膽，不僅美觀同時增強了抗腐蝕性。

7、獨特的夾具排氣設計，大大減少了試驗人員的勞動強度。

8、試樣在試驗過程中處于懸掛狀態，使其符合試驗標準要求。

三、符合標準

標準號

標準名稱

GB/T6111-2003

《流體輸送用熱塑性塑料管材耐內壓試驗方法》

GB/T18742.2

《冷熱水用聚丙烯管道系統》

GB/T18993.1—18993.3

《冷熱水用氯化聚氯乙烯管道系統》

ISO10508

《冷熱水系統用熱塑料管材和管件》

四、技術參數

型    號：        XCB-300Ⅱ

試驗箱控溫范圍：  室溫-120℃

控溫精度：        ±1℃

溫度示值誤差：    ±0.5℃

溫度均勻度：      ±1℃

適用的管徑：  Φ63mm 以下

試樣長度：     500mm 以內

夾裝工位：         12路

電    源：         (220-15% ～220+10%)VAC  50Hz 3.0kW 單相三線

XCB-300Ⅱ type plastic pipe fittings special test chamber for thermal stability test

Function, scope of application:

XCB-300Ⅱ type plastic pipe fittings thermal stability test special test box is mainly used for pipe at 110℃, the tube medium is air under the condition of hydrostatic test, determine the sample under the specified stress condition, through 8760 hours of test, whether there is damage. It can be used with hydrostatic testing machine to complete the thermal stability test under hydrostatic state.

Execution standard:

GB/T6111-2003 "Test method for internal pressure resistance of thermoplastic pipes for fluid Transportation"

GB/T18742.2 "Polypropylene piping system for hot and cold water"

GB/T18993.1 -- 18993.3 "Chlorinated polyvinyl chloride piping system for hot and cold water"

ISO10508 Thermoplastics pipes and fittings for hot and cold water systems

Double layer insulated glass door, built-in observation lamp, which is convenient for users to observe the test situation, but also avoid accidental burns.

Reasonable drainage device can eliminate the water generated by the failed test station in time, reduce the impact on other stations.

Thickened thermal insulation design, reduce the test cost, improve the reliability of the instrument.

◆ The heater has self-protection function to avoid the accidental damage of the heater.

◆ All stainless steel frame and liner, not only beautiful but also enhance corrosion resistance.

◆ Unique fixture exhaust design, greatly reduce the labor intensity of the test personnel.

Technical parameters: